Copying

This section describes how to load originals and copy them to plain paper.

1. Open the rear tray cover (A) and then pull up the paper support (B).

   

2. Open the feed slot cover (C).

   

3. Load paper vertically WITH THE PRINT SIDE FACING UP.

4. Align the paper guides (D) with the paper width.

   

5. Close the feed slot cover (E) gently.

   

   After closing the feed slot cover, the paper information registration screen for the rear tray is displayed on the LCD.

6. Select the size and type of the loaded paper in the rear tray at Page size and Type, and then select Register.

   

7. Open the operation panel (F) and then pull out the paper output tray (G).

   Be sure to open the operation panel before printing. If the operation panel is close, the printer does not start printing.

   

8. Press the HOME button (H).

9. Select Copy (I).

   

10. Select Standard copy.

11. Open the document cover (J).

12. Load the original WITH THE SIDE TO COPY FACING DOWN and align it with the alignment mark (K).

    

13. Close the document cover.

14. Confirm the paper settings, then press the Start button (L).

    

Important

• Do not open the document cover until copying is complete.

Note

• Your printer is equipped with many other convenient copy features.

  • Copying